At Ranflex Metals, these IS 4923 YST 310 Cold Formed Seamless Square Hollow Section Tubing is available in different shapes and sizes, customer can get it easily in their desired shapes and sizes. The international quality of standards of 4923 YST Mild Steel Cold Formed Square Tubes are ASTM, API, ASME, AIS, etc. It consists of excellent tensile strength and best weldability properties. These Cold Formed IS4923 YST310 Square Hollow Section is capable of working at increasing temperatures and in severe weather. It has excellent fire resistance and corrosion resistance properties. It also possesses good conductivity and formability properties.
The Cold Formed IS YST 310 SHS Pipe‘s are used in the most of the industries, due to its distinct features such as in oil & gas processing units, pharmaceutical industry, building construction, pulp and paper industry, petrochemicals industry, and in the chemical industry. These Cold Formed YST 310 Mild Steel Square Hollow Sections are always preferred to convey oil, gas, water, chemicals, and other fluids. These Pipes can be even used in rainy or extremely hot temperatures. The length of IS 4923 YST 310 Cold Formed Carbon Steel Square Hollow Sections ranges from 3m to 6m. It is available in rectangular, round, and square shapes and it is available at a very affordable price.
These Cold Formed IS4923 YST310 Square Hollow Section goes through several tests such as micro and macro tests, flattering tests, quality tests, etc. At Ranflex Metals, we ensure 100% safety of Cold Formed YST 310 Mild Steel Square Hollow Section during transportation.
Sizes | 20mm x 20mm TO 400 x 400mm |
Wall Thickness: | 0.5mm - 25mm |
Length : | 6.0 m ± 0.05 m Customized length ranging from 6 m to 11 m |
Type : | Seamless/ Welded / ERW |
Dimensional Tolerances : | Thickness : (All sizes +/- 10%) |
Outside Dimensions of sides : | +/-1% with a minimum of +/-0.50 mm |
Squareness of Corners : | 90 deg.+/-2 deg. |
Corner radius : | 3 t, Max where t is the thickness of the section. |
Corner radius : | 3 t, Max where t is the thickness of the section. |
Concavity / Convexity : | 1 percent of the size |
Twist Tolerance : | Maximum 2 mm ± 0.05 mm/m length-measured relative vertical shift of any adjacent corner of the section, measured by keeping one side on flat surface |
End Finish : | Plain ended-Mechanically sheared, mill-cut finish without further machining. |
Packing : | In bundles, Anticorrosion heat preservation, Varnish coating, Ends can be bevelled or square cut, End Capped Certification & supplementary test, Finishing & Identity Mark |
Surface Finish : | Black without any surface treatment of oiling or varnishing. |