At Ranflex Metals, We always emphasized that our Hot Finished EN 10210 S275J0H Rectangular Hollow Sections are being manufactured following international standards of quality. EN 10210 S275J0H MS Hot Finished Rectangular Hollow Section have the best corrosion resistance to pitting and crevice corrosion. The size of these Carbon Steel S275J0H Rectangular Hollow Section is from 20mm*20mm to 400mm*400mm, and its length ranges from 6000mm to 14000mm. These Rectangular Hollow Sections are made using the best raw material to ensure its long durability and it comes with an accurate rugged design.
Grade S275J0H Hot Finished Welded Structural Rectangular Hollow Sections provide the excellent corrosion resistance to oxidation corrosion up to 870 Degree C, whereas, it continuous service it gives corrosion resistance up to 925 Degree C. These Rectangular Hollow Section Pipe offers high tensile strength and best mechanical properties. At Ranflex Metals, We always emphasized that our Hot Finished EN 10210 S275J0H Rectangular Hollow Sections are being manufactured following international standards of quality. Hot Finished S275J0H Mild Steel Rectangular Hollow Section has the best corrosion resistance properties. It contains 1.6% manganese content, and some portion of carbon, silicon, phosphorus, and sulfur content.
Grade S2750H Hot Finished Welded Structural Rectangular Hollow Section is mostly used in the petrochemicals and petroleum industry. It is also used in the chemical industry. EN 10210 Hot Finished S275J0H ERW Rectangular Hollow Section Pipes are often used in marine industry and offshore oil drilling companies. It is widely used in the pulp and paper industry. Hot Finished EN 10210 S275JOH Rectangular Hollow Section is used extensively in food processing equipment and food packaging equipment.
Standard |
BS EN 10210 - Hot finished structural hollow sections of non-alloy and fine grain steels |
Grade |
S275J0H |
Sizes |
10mm x 15mm --- 150mmx50mm --- 300mmx400mm --- 600mmx550mm |
Wall Thickness |
0.5mm - 25mm |
Length |
6000-14000 mm |
Type |
Seamless/ Welded / ERW |
Dimensional Tolerances |
Thickness (All sizes +/- 10%) |
Packing |
In bundles, Anticorrosion heat preservation, Varnish coating, Ends can be bevelled or square cut, End Capped Certification & supplementary test, Finishing & Identity Mark |
Surface Protection |
Black (Self Coloured uncoated), Varnish/Oil Coating, Pre-Galvanized, Hot Dip Galvanized |